| 描述 | [问题描述]
镜像anolisos_7_9_x64_20G_anck_alibase_20211126.vhd
实例规格：ecs.g6a.32xlarge
systemctl --failed检查postfix.service loaded failed failed
[机器信息]
[root@iZbp1ivhftbdd2rb1sny0gZ-229 ~]## cat /etc/os-release
NAME="Anolis OS"
VERSION="7.7"
ID="anolis"
ID_LIKE="rhel fedora centos"
VERSION_ID="7.7"
PRETTY_NAME="Anolis OS 7.7"
ANSI_COLOR="0;31"
HOME_URL="https://openanolis.cn/"
BUG_REPORT_URL="https://bugs.openanolis.cn/"
CENTOS_MANTISBT_PROJECT="CentOS-7"
CENTOS_MANTISBT_PROJECT_VERSION="7"
REDHAT_SUPPORT_PRODUCT="centos"
REDHAT_SUPPORT_PRODUCT_VERSION="7"
[root@iZbp1ivhftbdd2rb1sny0gZ-229 ~]# uname -a
Linux iZbp1ivhftbdd2rb1sny0gZ 4.19.91-24.8.an7.x86_64 #1 SMP Sat Sep 18 16:53:17 CST 2021 x86_64 x86_64 x86_64 GNU/Linux
[root@iZbp1ivhftbdd2rb1sny0gZ-229 ~]# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 128
On-line CPU(s) list: 0-127
Thread(s) per core: 2
Core(s) per socket: 16
Socket(s): 4
NUMA node(s): 4
Vendor ID: AuthenticAMD
CPU family: 23
Model: 49
Model name: AMD EPYC 7H12 64-Core Processor
Stepping: 0
CPU MHz: 2595.124
BogoMIPS: 5190.24
Virtualization: AMD-V
Hypervisor vendor: KVM
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 512K
L3 cache: 16384K
NUMA node0 CPU(s): 0-31
NUMA node1 CPU(s): 32-63
NUMA node2 CPU(s): 64-95
NUMA node3 CPU(s): 96-127
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid tsc_known_freq pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw topoext perfctr_core ssbd ibpb stibp vmmcall fsgsbase tsc_adjust bmi1 avx2 smep bmi2 rdseed adx smap sha_ni xsaveopt xsavec xgetbv1 arat npt nrip_save
[实际结果]：
[root@iZbp1ivhftbdd2rb1sny0gZ-229 ~]# systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● postfix.service loaded failed failed Postfix Mail Transport Agent
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
[复现频率]
必现
|
|---|
